Granite is an open-pore natural stone and should be protected against the of moisture with a seal. However, not all types of granite need sealing. A simple test shows the need. Sealing is an easy and quick job.

Al Shuwaifat Marble & Granite Services recommend. There are few steps to follow while sealing granite.

1. Pre-Cleaning
   Spray the granite  with a gentle special cleaner and brush or scrub the surface properly. Wash it out with clean water and repeat the process.
2. Let it Dry Out
   After cleaning, the granite has to dry completely and stone-deep. Protect the stone outdoors with cover foil. This should be suspended from the granite to avoid condensation. Only work outdoors when the weather is dry. Avoid indoor activities that increase the humidity, such as cooking or hanging laundry to dry.
3. Apply Sealer
   After safe drying of at least 48 hours, spray the mixed or pure sealant evenly onto the granite surface according to the manufacturer’s instructions. Rub the granite using light circular polishing.
4. Let it Work
   Most manufacturers state that the drying time is between four and 24 hours. To be on the safe side, you should not use the granite surface again until after twelve hours.

We have professionals who provide Granite Sealing Services with proper manner. So if you need our services feel free to contact us via social media or directly via phone call. We would help you and guide you in proper way.